Time-Temperature-Transformation Curves for Kaolinite-α-Alumina

The C-shaped time-temperature-transformation curves (T-T-T curves) of cristobalite formation and the L-shaped T-T-T curves of α-alumina reaction were established for a high-purity kaolinite-α-alumina mixture during heating. The results revealed that cristobalite formation in kaolinite was retarded by the presence of α-alumina between 1250° and 1350°C and was totally prohibited above 1380°C due to the reaction of kaolinite with α-alumina to form secondary mullite. The reaction of α-alumina with kaolinite was initiated at about 1250°C. It became quite extensive above 1380°C and was extremely fast at 1600°C and above, indicating the strong effect of the eutectic liquid formation at ∼1587°C in silica-alumina. The effectiveness of the established T-T-T curves was demonstrated and discussed.     

Sex pheromone of aPlanotortrix excessana sibling species and reinvestigation of related species

The sex pheromone of aPlanotortrix excessana sibling species was investigated. Females were found to produce eight potential pheromone components: dodecyl acetate, tetradecyl acetate (14OAc). (Z)-5-tetradecenyl acetate (Z5-14OAc), (Z)-7-tetradecenyl acetate (Z7-14OAc), (Z)-9-tetradecenyl acetate, hexadecyl acetate, (Z)-7-hexadecenyl acetate, and (Z)-9-hexadecenyl acetate. When these compounds were bioassayed using field-trapping and wind-tunnel techniques, only 14OAc,Z5-14OAc, andZ7-14OAc were found to be behaviorally active. The sex pheromone glands of females of other species including,Planotortrix MBS,Planotortrix M,P. notophaea, Ctenopseustis servana, and aC. obliquana sibling species, were also found to containZ5-14OAc orZ7-14OAc, singly or in combination. In the case ofPlanotortrix M, the addition ofZ7-14OAc to the previously identified sex pheromone blend ofZ5-14OAc and 14OAc was found to increase trap captures of male moths of this species. Thus in these New Zealand species (and in some Australian species),Z5-14OAc andZ7-14OAc appear to be utilized in combination in pheromonal communication just as (Z)-11-tetradecenyl acetate and (E)-11-tetradecenyl acetate are used by many species of Holarctic Tortricidae in the tribe Archipini.Lepidoptera: Tortricidae: Tortricinae.     

Location of steel reinforcement in concrete using ground penetrating radar and neural networks

Ground-penetrating radar is becoming increasingly popular for use as a non-destructive assessment method for investigating reinforced concrete structures. The amount of data collected however can be very large and take a significant level of subjective experience to interpret. This study focuses upon the use of a neural network approach to automate and facilitate the post-processing of ground penetrating radar results. The radar data is reduced to a simplified data set by using an edge detection routine. Signal reflections from reinforcing bars displaying a hyperbolic image format are detected using a multi-layer perceptron (MLP) network with a single hidden layer containing 8 nodes to recognise a simplified hyperbolic shape. Training and testing of the network was carried out making use of an emulsion analogue tank, simulating the properties of concrete, and using real concrete specimens. The results showed that the use of a MLP neural network approach could be quite effective in automating the identification and location of embedded steel reinforcing bars from a radar investigation. Accurate estimation of depth, or cover, requires a reliable knowledge of the dielectric properties of the concrete, and recent work using a specially-developed wideband horn antenna for direct determination of in situ properties is also outlined.     

Situational awareness architecture for smart grids developed in accordance with dispatcher’s thought process: a review

The operational environment of today’s smart grids is becoming more complicated than ever before. A number of factors, including renewable penetration, marketization, cyber security, and hazards of nature, bring challenges and even threats to control centers. New techniques are anticipated to help dispatchers become aware of the accurate situations as they manipulate and navigate the situations as quickly as possible. To address the issues, we first introduce the background for this topic as well as the emerging technical demands of situational awareness in the dispatcher’s environment. The general concepts and technical requirements of situational awareness are then summarized, aimed at offering an overview for readers to understand the state-of-the-art progress in this area. In addition, we discuss the importance of integrating the architecture of support tools in accordance with the dispatcher’s thought process, which in fact guides correct and swift reactions in real-time operations. Finally, the prospects for situational awareness architecture are investigated with the goal of presenting situational awareness modules in an advanced and visualized manner.     

Evolution of the cranial computed tomography scan in child abuse

Computed tomography (CT) scans obtained at the time of clinical presentation have occasionally been reported to be normal in children with history and findings of significant abusive head injury. We have retrospectively observed abnormalities in "normal" scans of some similar children. We have also seen abnormalities develop on serial scanning. To determine how frequently these situations occur, we reviewed charts of 34 children with a final diagnosis of child abuse who also had cranial CT scans performed. Their CT scans were retrospectively reviewed by a pediatric radiologist. Eleven (11/34) CT scans had initially been interpreted as normal. Four (4/11) of these had been reinterpreted during the hospitalization as abnormal, affecting medical (1) and legal (3) outcome. Repeat scanning in three of the remaining seven resulted in surgical drainage of a subdural effusion (1) and affected legal outcome (2). Four of the seven initial scans felt normal throughout the hospitalizations were judged abnormal on retrospective review. This evaluation was confirmed in the two rescanned. Initial CT interpretation most often failed to appreciate changes in parenchymal density and small amounts of falcine or cortical subdural blood. Subsequent scans also showed evolving effusions and infarcts. Changes were noted in 1 1/2 to 5 days. The CT scan frequently shows subtle changes in the immediate posttrauma period. If the child does not recover promptly, subsequent scans frequently result in significant changes in clinical and legal management.     

Healing Effect of Controlled Anti‐Electromigration on Conventional and High‐Tc Superconducting Nanowires

The electromigration process has the potential capability to move atoms one by one when properly controlled. It is therefore an appealing tool to tune the cross section of monoatomic compounds with ultimate resolution or, in the case of polyatomic compounds, to change the stoichiometry with the same atomic precision. As demonstrated here, a combination of electromigration and anti‐electromigration can be used to reversibly displace atoms with a high degree of control. This enables a fine adjustment of the superconducting properties of Al weak links, whereas in Nb the diffusion of atoms leads to a more irreversible process. In a superconductor with a complex unit cell (La_2?x Ce_x CuO₄), the electromigration process acts selectively on the oxygen atoms with no apparent modification of the structure. This allows to adjust the doping of this compound and switch from a superconducting to an insulating state in a nearly reversible fashion. In addition, the conditions needed to replace feedback controlled electromigration by a simpler technique of electropulsing are discussed. These findings have a direct practical application as a method to explore the dependence of the characteristic parameters on the exact oxygen content and pave the way for a reversible control of local properties of nanowires.     

Uncertain supply chain network design considering carbon footprint and social factors using two-stage approach

Sustainable development has become one of the leading global issues over the period of time. Currently, implementation of sustainability in supply chain has been continuously in center of attention due to introducing stringent legislations regarding environmental pollution by various governments and increasing stakeholders’ concerns toward social injustice. Unfortunately, literature is still scarce on studies considering all three dimensions (economical, environmental and social) of sustainability for the supply chain. An effective supply chain network design (SCND) is very important to implement sustainability in supply chain. This study proposes an uncertain SCND model that minimizes the total supply chain-oriented cost and determines the opening of plants, warehouses and flow of materials across the supply chain network by considering various carbon emissions and social factors. In this study, a new AHP and fuzzy TOPSIS-based methodology is proposed to transform qualitative social factors into quantitative social index, which is subsequently used in chance-constrained SCND model with an aim at reducing negative social impact. Further, the carbon emission of supply chain is estimated by considering a composite emission that consists of raw material, production, transportation and handling emissions. In the model, a carbon emission cap is imposed on total supply chain to reduce the carbon footprint of supply chain. To solve the proposed model, a code is developed in AMPL software using a nonlinear solver SNOPT. The applicability of the proposed model is illustrated with a numerical example. The sensitivity analysis examines the effects of reducing carbon footprint cap, negative social impacts and varying probability on the total cost of the supply chain. It is observed that a stricter carbon cap over supply chain network leads to opening of more plants across the supply chain. In addition, carbon footprint of supply chain is found to be decreased in certain extent with the reduction in negative social impacts from suppliers. The carbon footprint of the supply chain is found to be reduced with increasing certainty of material supply from the suppliers. The total supply chain cost is observed to be augmented with increasing probability.     

Flap prefabrication: effectiveness of different vascular carriers

A new experimental model of a vascular carrier to prefabricate a "secondary" island flap, the popliteal musculovascular pedicle, was developed in the rat. Using quantitative skin-surface fluorometry 30 minutes after sodium fluorescein injection and a flap survival area in the prefabricated 8 x 2.5-cm abdominal composite island flap, we compared the revascularization ability of our muscular carrier to nonrevascularized controls: the skeletonized arteriovenous pedicle and the fasciovascular pedicle. The free composite graft with no vascular carrier exhibited near-total necrosis. The skeletonized vascular pedicle demonstrated 15.2% +/- 7.8% perfusion of normal skin on dye fluorescence index measurements and 50% flap survival. The fasciovascular pedicle exhibited better revascularization, with a dye fluorescence index of 36.2 +/- 15.5 (p < 0.01) and 90% +/- 10% flap survival (p < 0.001). India ink injection study and histological examination of our model provided visual evidence of revascularization from the musculovascular pedicle, along with preservation of the carrier's muscular architecture. The musculovascular pedicle is a reliable carrier for making new, vascularized composite flaps.